Series |
Application |
SD |
4-flute rougher/finisher for ultra fast machining of steels and alloys |
SDEL |
4-flute rougher/finisher for ultra fast machining of steels and alloys |
SH |
Extended reach 4-flute rougher for ultra fast machining of steels |
SHEL |
4-flute hog mill rougher for ultra fast machining of steels and alloys |
ST |
5-flute ramp and run for pocketing and mill/drilling at steep angles |
STEL |
Extended reach 5-flute ramp and run for pocketing and mill/drilling at steel angles |
XM |
7-flute for high speed finishing of high nickel and exotic alloys |
SM |
5-flute medium helix for all steels and exotic alloys |
SF |
6-flute 45° finisher for profiling and finishing of steels and stainless steels |
SS |
3-flute slotting/profiling end mill for steels and stainless steels |
Series |
Application |
AT |
3-flute ramp and run for pocketing and mill/drilling at steep angles |
ATEL |
3-flute ramp and run for pocketing and mill/drilling at steel angles |
AF |
4 variable pitch/helix finisher and 5-flute finisher for aluminum |
AR |
3-flute hog mill rougher for ultra fast machining of aluminum |
AREL |
Extended reach 3-flute hog mill rougher for ultra fast machining of aluminum |
HS |
Hyper speed double hook high performance 3-flute aluminum cutter |
HSEL |
Extended reach hyper speed double hook high performance 3-flute aluminum cutter |
BHS |
Ball end hyper speed double hook high performance 3-flute aluminum cutter |
BHSEL |
Extended reach ball end hyper speed double hook high performance 3-flute aluminum cutter |
SC |
45° helix double hook high performance aluminum cutter, available in 2- and 3-flute |
BSC |
Ball end 45° helix double hook high performance aluminum cutter, available in 2-flute |
SCEL |
XL 45° helix double hook high performance aluminum cutter, 2-flute |
BSCEL |
XL ball end 45° helix double hook high performance aluminum cutter, 2-flute |
Series |
Application |
CM |
Standard geometry end mills in 2- and 4-flute and L, XL, and EL lengths |
BM |
Ball end standard geometry end mills in 2- and 4-flute and L, XL, and EL lengths |
CRE |
Corner rounding end mills double end in regular and EL lengths |
TM |
3-flute tapered end mills in square end |
TB |
3-flute tapered end mills in ball end |
DNC |
NC spot drills in regular and extended lengths |
CHMR |
2- and 4-flute chamfer mills |