Techniks

"Power Coat" ER Collet Nuts

• Turn ER or TG toolholders into milling chucks
• Reduce T.I.R. by increasing holding power
• Increase tool life by up to 20%
• Available for 60,000 RPM spindles
• Coolant style available

This innovative, permanent coating increases clamping pressure up to 75% compared to an uncoated standard ER nut. More holding power reduces the chance of spinning the shank of the tool inside the collet, which can cause premature failure of the collet. "Power Coat" nuts also have an eccentric ring that holds the collet inside the nut when turned upside down. They are balanced for high-speed operations.